COD Tubes and Reagents

AccuSPEC COD Digestion Tubes use standard 16 mm tubes that have been prefilled with the digestion reagent. The solution contains mercuric sulfate (HgSO4) to remove up to 2000 ppm of chloride interference.

COD Digestion Tubes

Simply aliquot 2 ml of sample directly to the prefilled COD digestion tube, replace the screw cap, and mix by inverting the tube. Place the digestion tubes in the DigiPREP CUBE, or the Automated EasyPREP COD-200, set to 150 °C. Heat for 2 hours, allow samples to cool, then measure in a spectrophotometer at the appropriate wavelength. For more information on the EasyPREP COD-200, click here.

AccuSPEC COD Tubes are:

·         Fully compatible with EPA 410.4 and Standard Methods 5220

·         Available in three ranges (150 mg/L, 1500 mg/L, 15 000 mg/L)

·         Compatible with standard reactors and spectrophotometers

·         COD Tubes Flyer (PDF, 160KB)

140-715-101COD (CRM), low levelea Details
140-715-102COD (CRM), high levelea Details
250-130-006COD Tubes, 0-150ppm (box/25)ea Details
250-130-007COD Tubes, 0-150ppm (box/200)ea Details
250-130-016COD Tubes, 0-1500ppm (box/25)ea Details
250-130-017COD Tubes, 0-1500ppm (box/200)ea Details
250-130-026COD Tubes, 0-15,000ppm (box/25)ea Details
250-130-027COD Tubes, 0-15,000ppm (box/200)ea Details
250-130-150Ferrous Ammonium Sulfate 0.00282N500ml Details
250-130-151Ferrous Ammonium Sulfate 0.00282NL Details
250-130-152Ferrous Ammonium Sulfate 0.00282N4L Details
250-130-200Ferrous Ammonium Sulfate500ml Details
250-130-201Ferrous Ammonium SulfateL Details
250-130-202Ferrous Ammonium Sulfate4L Details
250-130-250Ferrous Ammonium Sulfate500ml Details
250-130-251Ferrous Ammonium SulfateL Details
250-130-252Ferrous Ammonium Sulfate4L Details
250-130-300Ferrous Ammonium Sulfate 0.25N500ml Details
250-130-301Ferrous Ammonium Sulfate 0.25NL Details
250-130-350Ferrous Ammonium Sulfate500ml Details
Displaying items 1 - 20 of 36