COD Tubes and Reagents

AccuSPEC COD Digestion Tubes use standard 16 mm tubes that have been pre-filled with digestion reagent.

The solution contains mercuric sulfate (HgSO4) to remove up to 2000 ppm of chloride interference.



COD Digestion Tubes

Simply aliquot 2 ml of sample directly to the pre-filled COD digestion tube, replace the screw cap, and mix by inverting the tube. Place the digestion tubes in the DigiPREP CUBE, or the Automated EasyPREP COD-200, set to 150 °C. Heat for 2 hours, allow samples to cool, then measure in a spectrophotometer at the appropriate wavelength.


AccuSPEC COD Tubes are:

  • Fully compatible with EPA 410.4 and Standard Methods 5220
  • Available in three ranges (150 mg/L, 1500 mg/L, 15 000 mg/L)
  • Compatible with standard reactors and spectrophotometers
  • COD Tubes Flyer: click here


Catalogue
Filter
Description
Filter
UM(sorted ascending)
Filter
  
250-130-512COD Control Solution, 100ppm O2125ml Details
250-130-602COD Control Solution, 1000ppm O2125ml Details
250-130-652COD Control Solution 10000 ppm O2125ml Details
250-130-701COD Control Solution, 200ppm O2250ml Details
250-130-152Ferrous Ammonium Sulfate 0.00282N4L Details
250-130-202Ferrous Ammonium Sulfate4L Details
250-130-252Ferrous Ammonium Sulfate 0.1N4L Details
250-130-352Ferrous Ammonium Sulfate4L Details
250-130-452Ferrous Ammonium Sulfate4L Details
250-130-150Ferrous Ammonium Sulfate 0.00282N500ml Details
250-130-200Ferrous Ammonium Sulfate500ml Details
250-130-250Ferrous Ammonium Sulfate 0.1N500ml Details
250-130-300Ferrous Ammonium Sulfate 0.25N500ml Details
250-130-350Ferrous Ammonium Sulfate500ml Details
250-130-450Ferrous Ammonium Sulfate500ml Details
250-130-550COD Control Solution, 100ppm O2500ml Details
250-130-600COD Control Solution, 1000ppm O2500ml Details
250-130-650COD Control Solution, 10000 ppm O2500ml Details
140-715-101COD (CRM), low levelea Details
140-715-102COD (CRM), high levelea Details
Displaying items 1 - 20 of 38