COD Tubes and Reagents

AccuSPEC COD Digestion Tubes use standard 16 mm tubes that have been prefilled with the digestion reagent. The solution contains mercuric sulfate (HgSO4) to remove up to 2000 ppm of chloride interference.


COD Digestion Tubes

Simply add 2 ml of sample to the tube, tightly replace the screw cap, and mix the contents by inverting the tube a few times. Place the vials in the DigiPREP CUBE, set to 150 °C, and allow to reflux for 2 hours. Once cooled to room temperature, the samples can be measured using a UV-visible spectrometer.

AccuSPEC COD Tubes are:

• Fully compatible with EPA 410.4 and Standard Methods 5220

Available in three ranges (150 mg/L, 1500 mg/L, 15 000 mg/L)

Compatible with standard reactors and spectrophotometers

COD Tubes Flyer (PDF, 160KB)

 
Filter
 
Filter
 
Filter
  
140-715-101COD (CRM), low levelea Details
140-715-102COD (CRM), high levelea Details
250-130-006COD Tubes, 0-150ppm (box/25)ea Details
250-130-007COD Tubes, 0-150ppm (box/200)ea Details
250-130-016COD Tubes, 0-1500ppm (box/25)ea Details
250-130-017COD Tubes, 0-1500ppm (box/200)ea Details
250-130-026COD Tubes, 0-15,000ppm (box/25)ea Details
250-130-027COD Tubes, 0-15,000ppm (box/200)ea Details
250-130-106Autochem COD Tubes, box/25 (15-160ppm)ea Details
250-130-107Autochem COD Tubes, box/200 (15-160ppm)ea Details
250-130-116Autochem COD Tubes, box/25 (100-1500ppm)ea Details
250-130-117Autochem COD Tubes, bx/200 (100-1500ppm)ea Details
250-130-150Ferrous Ammonium Sulfate 0.00282N500ml Details
250-130-151Ferrous Ammonium Sulfate 0.00282NL Details
250-130-152Ferrous Ammonium Sulfate 0.00282N4L Details
250-130-200Ferrous Ammonium Sulfate500ml Details
250-130-201Ferrous Ammonium SulfateL Details
250-130-202Ferrous Ammonium Sulfate4L Details
250-130-250Ferrous Ammonium Sulfate500ml Details
250-130-251Ferrous Ammonium SulfateL Details
Displaying items 1 - 20 of 40