COD Tubes and Reagents

AccuSPEC COD Digestion Tubes use standard 16 mm tubes that have been prefilled with the digestion reagent. The solution contains mercuric sulfate (HgSO4) to remove up to 2000 ppm of chloride interference.


COD Digestion Tubes

Simply add 2 ml of sample to the tube, tightly replace the screw cap, and mix the contents by inverting the tube a few times. Place the vials in the DigiPREP CUBE, set to 150 °C, and allow to reflux for 2 hours. Once cooled to room temperature, the samples can be measured using a UV-visible spectrometer.

AccuSPEC COD Tubes are:

• Fully compatible with EPA 410.4 and Standard Methods 5220

Available in three ranges (150 mg/L, 1500 mg/L, 15 000 mg/L)

Compatible with standard reactors and spectrophotometers

COD Tubes Flyer (PDF, 160KB)

 
Filter
 (sorted ascending)
Filter
 
Filter
  
250-130-107Autochem COD Tubes, box/200 (15-160ppm)ea Details
250-130-116Autochem COD Tubes, box/25 (100-1500ppm)ea Details
250-130-106Autochem COD Tubes, box/25 (15-160ppm)ea Details
250-130-117Autochem COD Tubes, bx/200 (100-1500ppm)ea Details
140-715-102COD (CRM), high levelea Details
140-715-101COD (CRM), low levelea Details
250-130-652COD Control Solution 10000 ppm O2125ml Details
250-130-650COD Control Solution, 10000 ppm O2500ml Details
250-130-651COD Control Solution, 10000ppm O2L Details
250-130-600COD Control Solution, 1000ppm O2500ml Details
250-130-601COD Control Solution, 1000ppm O2L Details
250-130-512COD Control Solution, 100ppm O2125ml Details
250-130-550COD Control Solution, 100ppm O2500ml Details
250-130-551COD Control Solution, 100ppm O2L Details
250-130-701COD Control Solution, 200ppm O2250ml Details
250-130-602COD Standard, 1000ppm O2125ml Details
250-130-027COD Tubes, 0-15,000ppm (box/200)ea Details
250-130-026COD Tubes, 0-15,000ppm (box/25)ea Details
250-130-017COD Tubes, 0-1500ppm (box/200)ea Details
250-130-016COD Tubes, 0-1500ppm (box/25)ea Details
Displaying items 1 - 20 of 40