COD Tubes and Reagents

AccuSPEC COD Digestion Tubes use standard 16 mm tubes that have been pre-filled with digestion reagent.

The solution contains mercuric sulfate (HgSO4) to remove up to 2000 ppm of chloride interference.



COD Digestion Tubes

Simply aliquot 2 ml of sample directly to the pre-filled COD digestion tube, replace the screw cap, and mix by inverting the tube. Place the digestion tubes in the DigiPREP CUBE, or the Automated EasyPREP COD-200, set to 150 °C. Heat for 2 hours, allow samples to cool, then measure in a spectrophotometer at the appropriate wavelength.


AccuSPEC COD Tubes are:

  • Fully compatible with EPA 410.4 and Standard Methods 5220
  • Available in three ranges (150 mg/L, 1500 mg/L, 15 000 mg/L)
  • Compatible with standard reactors and spectrophotometers
  • COD Tubes Flyer: click here


Catalogue
Filter
Description
Filter
UM(sorted ascending)
Filter
  
250-130-006COD Tubes, 0-150ppm (box/25)ea Details
250-130-007COD Tubes, 0-150ppm (box/200)ea Details
250-130-008COD Tubes, 0-150ppm (CS of 400)ea Details
250-130-016COD Tubes, 0-1500ppm (box/25)ea Details
250-130-017COD Tubes, 0-1500ppm (box/200)ea Details
250-130-018COD Tubes, 0-1500ppm (CS of 400)ea Details
250-130-026COD Tubes, 0-15,000ppm (box/25)ea Details
250-130-027COD Tubes, 0-15,000ppm (box/200)ea Details
250-130-028COD Tubes, 0-15,000ppm (CS of 400)ea Details
250-130-151Ferrous Ammonium Sulfate 0.00282NL Details
250-130-201Ferrous Ammonium SulfateL Details
250-130-251Ferrous Ammonium Sulfate 0.1NL Details
250-130-301Ferrous Ammonium Sulfate 0.25NL Details
250-130-351Ferrous Ammonium SulfateL Details
250-130-451Ferrous Ammonium SulfateL Details
250-130-551COD Control Solution, 100ppm O2L Details
250-130-601COD Control Solution, 1000ppm O2L Details
250-130-651COD Control Solution, 10000ppm O2L Details
Displaying items 21 - 38 of 38