Page 16 - Catalog Instruments and Supplies

16 SCP SCIENCE
Sample Pretreatment Equipment

Sample Pretreatment Equipment
Open Pan Riffle Sample Splitter

Constructed in stainless or galvanized steel, the sample splitter has a wide application since
it can be used for fine aggregates as well as many coarse sizes. Sample is poured into
the hopper chute and the riffle splitter divides it into two equal portions that discharge into
separate pans. The split is then repoured until the desired number of representative samples
are obtained. The sample splitters are available with riffle openings of 3/8” or larger, and with
splitter sizes of 229 mm x 305 mm (9” x 12”) and 229 x 457 mm (9” x 18”).

Catalog No. Stainless Galvanized Description Riffle Size Number of
(Prefix) (Suffix) (Suffix) (in./mm) Riffles
Riffle, 229 x 305 mm ID, complete with (1) Pan and Stand
010-010 -801 -802 Riffle, 229 x 305 mm ID, complete with (1) Pan and Stand 0.375 / 9.53 32
010-010 -803 -804 Riffle, 229 x 305 mm ID, complete with (1) Pan and Stand 0.5 / 12.7 24
010-010 -805 -806 Riffle, 229 x 457 mm ID, complete with (1) Pan and Stand 0.625 / 15.9 18
010-010 -807 -808 Riffle, 229 x 457 mm ID, complete with (1) Pan and Stand 0.375 / 9.53 48
010-010 -809 -810 Riffle, 229 x 457 mm ID, complete with (1) Pan and Stand 0.5 / 12.7 32
010-010 -811 -812 0.625 / 15.9 28
010-010 -850 -851 Sample Pan, Small for 229 x 305 mm Riffle ---
010-010 -852 -853 Sample Pan, Large for 229 x 457 mm Rifle --- ---
---

www.scpscience.com | e-mail: [email protected] | phone: +1 (514) 457-0701